Observer: Specify the observer(s) in this window, without the use of
spaces.
Camera: Select Omega Prime_IRL on the camera menu, which makes
use of the Infrared Labs electronics. At some point in the future, we
will be switching to a new set of electronics built at MPIA, but this is
not currently available.
Camera-Optic: The Wide Field option should be selected
under the optics menu. There is no other mode for Omega-Prime!
Status and Motors should both default to on.
Temp.Controller: Omega-Prime does not currently have a temperature
controller.
Telescope: select CA3.5m for the telescope. This is the
only telescope on which Omega-Prime is available.
Focal-Ratio: should be set to f/3.5, which is the prime
focus of the 3.5m telescope.
Status: If the telescope is up and running, select on for the telescope status.
When you are satified with the selections, click on the OK
button to initialize the GUI.
